Stainless Steel Composite Panel Manufacturers Introduces What Is The Explosive Composite Process

Stainless Steel Composite Panel Manufacturers introduced the characteristics of the explosive composite process:

Stainless Steel Composite Panel Manufacturers introduced the characteristics of the explosive composite process:

  1. Since the explosive composite is cold processed, it can produce many kinds of metal composite panels in addition to stainless steel composite panels, such as titanium, copper, aluminum and so on.
  2. Explosive composite can produce stainless steel composite plates with a total thickness of several hundred millimeters, such as some large bases and tube plates. However, it is not suitable for the production of thinner clad steel plates with a total thickness of less than 10 mm.
  3. The explosive compound uses the energy production of explosives, which will cause vibration, noise and smoke pollution to the environment. However, the equipment investment is low, and there are hundreds of domestic explosion production plants. Due to the limitation of weather and other process conditions, the production efficiency of explosive compound is low. Hot-rolling composite process characteristics 1. It is produced by large-scale medium plate rolling mill and hot continuous rolling mill, so the production efficiency is high and the supply speed is fast. The product format is large and the thickness can be freely combined. Stainless steel cladding thickness of 0.5mm or more can be produced. But the investment is large, so there are fewer manufacturers.
  4. Due to the limitation of the rolling reduction ratio, the hot rolling production can not produce composite steel plates with a thickness of 50mm or more, and it is not convenient to produce various small batches, round composite plates and other special-shaped composite plates. Advantages of hot-rolled composite panels 6, 8, and 10 mm thin-gauge composite panels. Under hot continuous rolling conditions, it can produce composite coils, reduce production costs, and meet more user needs.
  5. Under current technical conditions, the hot rolling process cannot directly produce titanium, copper, aluminum and other non-ferrous metal composite plates.

Jialu bang

1 Blog posts

Comments