Where Is Dth Drill Pipe Used?

DTH Drill Pipe is mostly used in road and bridge construction, tunnel pipe shed, surface coal mine, mountain blasting, etc.

DTH Drill Pipe is mostly used in road and bridge construction, tunnel pipe shed, surface coal mine, mountain blasting, etc. There are mainly two types of diesel power and motor power, which can be applied to the reinforcement of poor geological rock formations. The drilling power comes from an air compressor.


Due to the poor working environment and the large amount of dust, it is impossible to keep DTH Drill Pipe clean. We can always check the air filter of the machine, blow as much as possible, and check the water, oil, and fuel every shift. Keep the radiator unobstructed, not easy to high temperature.

DTH Drill Pipe relies on the hydraulic system to move and operate. Check the hydraulic oil level and the color of the hydraulic oil. If the oil level is low, insufficient oil pump pressure will cause the machine to work slowly, and the oil will easily collapse. If the oil leaks due to abrasion, the hydraulic oil filter element should be cleaned frequently. If it is dirty, replace it as soon as possible. If it is used, it will damage the machine sooner or later.


In addition, when working, ensure that each drill pipe is clean and free of sand and gravel, which will not cause the impactor to fail. Adding lubricating oil to the atomizer will protect the life of the impactor, and it will be much easier to remove the drill pipe. There are a lot of things to note in the next issue. We hope you can discuss them together.


drilling kaiqiu

19 Blog posts

Comments